Sheet Metal Cassettes for Partition Cladding 102.17/A
Sheet metal cassettes are designed for cladding building structures - plasterboard and metal partitions. The sheet metal cassettes are made of sheet metal suitable for cleanrooms.
PRODUCT DESCRIPTION
- The final wall thickness is based on the thickness of the load-bearing partition.
- The sheet metal cassettes can be glued to the partition on one side (only from the cleanroom side), or on both sides.
PARTITIONS WITH FIRE RESISTANCE SUITABLE FOR CLEANROOMS
- After gluing the sheet metal cladding cassettes to fire-resistant plasterboard partitions, the partition meets all requirements for use in cleanrooms.
- Possibility of installing fire-resistant glazing.
TECHNICAL DATA
| Panel Type |
|---|
| Cladding sheet, cassette |
| Cassette Thickness |
|---|
| 0,8 mm |
| Note: the sheet thickness can be chosen from 0.6 – 1.0 mm |
| Cassette Width |
|---|
| 1230 mm |
| 615 mm |
| xxx mm |
as Atypical, the desired dimension can be entered
min. dimension 300 mm max. dimension 1230 mm of the panel |
| Cassette Height |
|---|
| 2550 mm |
| 2750 mm |
| 3050 mm |
| xxx mm |
H - height in mm according to the dimensional series
max. dimension 4000 mm (RAL), 2500 mm (AISI) |
| Left Edge Finish |
|---|
| Fold on the left side |
| Without fold on the left side |
| Right Edge Finish |
|---|
| Fold on the right side |
| Without fold on the right side |
| Bottom Edge Finish |
|---|
| Fold on the bottom side |
| Without fold on the bottom side |
| Top Edge Finish |
|---|
| Fold on the top side |
| Without fold on the top side |
| Color and material of the cladding - standard from the visible side |
|---|
| Galvanized sheet in RAL 9016 |
| Stainless steel AISI 304 |
| Galvanized sheet in RAL |
| Atypical Design |
|---|
| Standard Design |
| Atypical Design |
Standard Design
0 - unambiguous specification from the offered variants
Atypical Design
Q - atypical solution that cannot be unambiguously specified by code |
